SnoozyFix repair guides

Choose the kit you have.

Scan, match your SnoozyFix product, and open the correct step-by-step repair guide.

Already have a SnoozyFix kit?

Which kit do you have?

Match the product in your package to a card below, then tap the guide to start.

Replace the platform and motor O-rings and follow the complete disassembly and reassembly walkthrough.

Use this guide for the current SnoozyFix kit with the longer wiring and included ferrites.

Remove and replace worn motor bearings that can cause grinding, vibration, or rough movement.

Install the overmolded platform-support bearings and spacers that replace the older grooved bearing design.

Learn the push-down, quarter-turn motion used to remove and install the center locking pin without damage.

Follow the motor diagnostic and replacement flow before removing and installing the brushless motor.

More help

Use these for specific service steps, older SnoozyFix kits, and troubleshooting.

Not sure what you need?

Start with the diagnostic flow to narrow down the problem before buying parts.

A smoother repair

Watch the full tutorial once before opening your unit. Then keep the video nearby and work through it one step at a time.

1
Disconnect power
Unplug the bassinet before removing covers or touching internal parts.
2
Take reference photos
Photograph screw locations and cable routing as you disassemble.
3
Keep parts organized
Group screws by step so reassembly stays simple.
4
Test with the bassinet empty
Never repair-test with a baby in the bassinet. Reinstall both safety clips and complete an empty-SNOO functional test before use.